Skip to product information
1 of 8

Rockford Fosgate

Rockford Polaris RZR 6.5" Speakers, Enclosures and Marine Bluetooth Radio

Rockford Polaris RZR 6.5" Speakers, Enclosures and Marine Bluetooth Radio

Regular price $1,322.47 USD
Regular price Sale price $1,322.47 USD
Sale Sold out
Shipping calculated at checkout.

Rockford Polaris RZR 6.5" Speakers, Enclosures and Marine Bluetooth Radio

Our Gen-3 Stage 2 kit allows you to add front/rear audio on select RZR models, ideal if you are looking to add sound to your ride but not ready to add amplifiers or a subwoofer yet. Kit is equipped with a PMX-1 digital media receiver, upper/lower dash kit (installation location depends on RZR model,) front speaker enclosures, Element Ready M0 6.5" speakers, and rear M0 6.5" moto-cans with wiring harness. Kit supplied with all necessary mounting and installation hardware requiring minimal time and tools.

This Listing Includes:
(1) Radio - PMX-1
(1) Dash kit for PMX-1 - RZR14-DK
(2) Direct Fit Speaker Enclosures - RZR14-FSE
(2) 6.5" Marine Speakers - M0-65B
(2) 6.5" Moto-Can Speakers - M0WL-65MB
(1) Color Optix Speaker Add-On Harness - MX-RSM16
(1) AM/FM/WB Amplified 12V Antenna - PMX-ANT

PMX-1 Features:
- Wet bonded 2.3" Full Dot Matrix LCD Display
- 9H Tempered Glass Screen
- A2DP and AVRCP Bluetooth Wireless Streaming
- AUX and USB Inputs with USB Charging
- Independent Subwoofer Level Control
- 7-Band Graphic EQ + PEQ
- Selectable HP / LP / AP Crossovers with Selectable Slope 12 / 24 dB/Oct
- Voltage gauge with Low voltage Warning
- AM / FM / WB Tuner
- Multi Region Radio Frequencies
- IP6 Marine Grade Front Panel
- FCC, CE and EN60945 Certified

RZR14-DK Features:
- Texture and color matched to vehicle interior
- Direct bolt into vehicle using OEM mounting holes. Minimal drilling required
- No drilling or cutting required
- Replaces factory storage pocket
- Injection molded Centrex plastic with integrated UV inhibitors

RZR14-FSE Features:
- Texture and color matched to vehicle interior
- Direct bolt into vehicle using OEM mounting holes. Minimal drilling required
- No drilling or cutting required
- Lightweight design up to 40% lighter than previous generation
- Roto-mold design for lightweight and durable seamless construction
- Reinforced polymer with UV resistant finish

M0-65B Features:
- Grill Integrated 0.5" (13mm) LCP Balanced Dome Tweeter
- 1" (25mm) High Temp Kapton Woofer Voice Coil Former
- Sealed motor design
- 100% UV Stable ASA plastic frame & grille design stands up to harsh marine environment
- Zinc Nickel-plated Marine grade brass connection terminals
- Linear Synthetic Fiber Blend Spiders
- UV and Salt-Fog Resistant Santoprene Surround
- VAST vertical attach surround technique increases effective radiating cone area up to 25%
- Co-molded surround and mineral filled polypropylene cone body
- 6dB/Octave crossover network
- Fully sealed integrated concealed crossover (ICC) network

M0-65B Specifications:
Speaker Type: 2-Way Full-Range
Midrange Size(Nominal Diameter): 6.5"
Tweeter Size (Nominal Diameter): 0.5" (12.7 mm)
Nominal Impedance(Ohms): 4-Ohms
Power Handling: 65 Watts RMS, 250 Watts PEAK

M0WL-65MB Features:
- Element Ready design protects against outdoor exposure
- Integrated Deutsch/Amphenol connectors make wiring connections simple and error-proof
- Infinitely rotatable rear badge allowing for any orientation
- Included mounting clamp fits SXS ROPS (Roll Over Protection System) from 1" to 2"
- Deutsch connectors incorporate front/rear silicone seals to protect against environmental ingress
- Comes loaded with M0-65 Element Ready Speakers
- Provides superb low and midrange frequency reproduction with smooth high-frequency roll-off
- 100% UV Stable ASA plastic frame & grille design stands up to the harsh marine environment
- Injection molded mineral-filled polypropylene cone body with UV inhibitors
- VAST vertical attach surround technique increases effective radiating cone area up to 25%
- Klippel Verified certification program delivers the best possible speakers

M0WL-65MB Specifications:
Speaker Type: 2-Way Loaded Enclosure
Speaker Quantity: 2
Speaker Size: 6.5"
Enclosure Design: Sealed
Enclosure Material: High density ASA
Speaker Connector: 6-pin Deutsch/Amphenol
Frequency Response (Hz): 40 Hz - 25 kHz

MX-RSW16 Features:
- No drilling or cutting required
- Allows addition of rear speakers in UTV audio systems
- Designed for use with 2-seat and 4-seat models

PMX-ANT Features:
- Universal AM/FM/WB Antenna
- 12VDC Powered for +20dB of Signal Gain
- Omnidirectional
- IP67 Water & Dust Rated
- Double Sided Tape Mounting
- Quick Power Connect for Easy Installation

 

*** Special Order, Please allow 5-7 day for additional processing**

View full details